Konica Minolta bizhub C200 Service Manual page 73

5. Firmware upgrade
A. Controller
1. Turn OFF the main power switch.
4. Turn ON the main power switch and the sub power switch.
5. The Flash ROM Setup screen is displayed on the control panel display, and upgrading
starts.
6. When "FINISH" is displayed at the bottom of the control panel, upgrading of the firm-
ware is completed.
Turn OFF the main power switch.
NOTE
• NEVER turn OFF the main power switch until "FINISH" appears.
32
[1]
A02FF2C525DA
[1]
A02FF2C526DA
[1]
A02FF2C526DA
Field Service Ver. 2.0 Dec. 2008
2. Remove the cover [1] from the com-
pact flash insertion slot.
3. Insert the compact flash [1], to which
the controller files to be rewritten are
copied, into the slot.
NOTE
• Do not copy engine, job separator,
and other firmware to the compact
flash.
7. Remove the compact flash card [1]
from the slot.