Konica Minolta bizhub C200 Service Manual page 142

Field Service Ver. 2.0 Dec. 2008
[2]
[1]
[1]
[2]
7. Remove three screws [1], and
remove the metal plate [2].
NOTE
• Both end screws has a spacer.
Remove the screws, being careful
not to drop the spacers.
A02FF2C093DA
8. Disconnect the connector [1],
remove two screws [2], and remove
the IDC registration sensor/MK.
9. Repeat step 8 to remove IDC regis-
tration sensor/YC.
A02FF2C094DA
6. Other
101