Field Service Ver. 2.0 Dec. 2008
6.3.33
PH relay board (REYBPH)
1. Remove the front cover.
See P.50
2. Remove the transfer belt unit.
See P.24
[2]
[2]
[1]
[1]
[1]
[2]
[3]
[2]
A02FF2C098DA
A02EF2C128DA
[2]
A02EF2C129DA
3. Remove the harness from the wire
saddle [1].
4. Remove five screws [2], and remove
the front handle assy [3].
5. Remove the screw [1] each, and
remove the imaging unit contact
assy [2] of each color.
6. Remove two screws [1] each, and
remove the imaging unit roll assy [2]
of each color.
6. Other
81