Option Counter; Key Counter - Konica Minolta bizhub C200 Service Manual

6. Other
6. Call the service mode to the screen, and set "Bit 3 of Mode 423" of the soft switch to
"0".
7. Select [Service Mode] → [State Confirmation] → [Sensor Check (Scan)] → [Scanner],
and check the state of the original size detection sensor/2 (Original Size Detection
Opt.).
6.6

Option counter

1
6.6.1

Key counter

NOTE
• Before installing the key counter with the following instructions, attach the
optional mount kit for key counter MK-718 to the main body.
112
1
[2]
[1]
[2]
A02FF2C545DA
[1]
A02FF2C546DA
Field Service Ver. 2.0 Dec. 2008
1. Attach the key counter mounting
plate [1] with four screws [2].
NOTE
• Put the relay harness connector
into the mounting plate before
attaching the plate.
• Use the four long screws
(9646 0418 14: M4 x 18) in the key
counter kit to secure the counter
mounting bracket.
2. Attach the edge cover [1] to the key
counter mounting plate.
Insert the harness into the edge
cover.