10. Service Mode; 10.1 Service Mode Function Setting Procedure - Konica Minolta bizhub C200 Service Manual

Hide thumbs Also See for bizhub C200:

Table of Contents

10. Service Mode

• Ensure appropriate security for Service Mode function setting procedures. They

should NEVER be shown to any unauthorized person not involved with service

A. Procedure

1. Press the Utility/Counter key.

2. Touch [Check Details].

3. Press the following keys in this order; Stop

• When selecting [CE Authentication] under [Security Settings] available from Ser-

vice Mode, authentication by CE password is necessary.

Enter the 8 digits CE password, and touch [END].

(The initial setting for CE password is "92729272.")

• NEVER forget the CE password. When forgetting the CE password, it becomes

necessary to replace the RAMU board with a new one and call responsible person

• The service code entered is displayed as "

4. The Service Mode menu will appear.

• Be sure to change the CE password from its default value.

• For the procedure to change the CE password, see the Security Settings.

• Touch the [OK] key.

• When changing the setting value in service mode, make sure to turn main power

switch off once and turn it on again.

C. Changing the setting value in Service Mode functions

• Use the [+] / [-] key to enter or change the setting value.

• Use the 10-key pad to enter the setting value. (To change the setting value, first press the

Clear key before making an entry.)

Field Service Ver. 2.0 Dec. 2008

A02FF3E517DA

Table of Contents