High Voltage Unit (Hv); Tray 1 Fd Paper Size Detect Board (Psdtb/1) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
6.3.37

High voltage unit (HV)

1. Remove the rear cover.
See P.47
[1]
[2] [1]
[3] [1]
6.3.38

Tray 1 FD paper size detect board (PSDTB/1)

1. Slide out the tray 1.
2. Remove the high voltage unit.
See P.87
[2]
[1]
2. Disconnect seven connectors [1].
[1]
A02FF2C075DA
3. Remove five screws [1] and the tab
[2], and remove the high voltage unit
[3].
NOTE
• When reinstalling the high voltage
unit, make sure that the terminal
end surely contacts.
A02FF2C076DA
3. Remove two screws [1], and remove
the lower rear cover [2].
A02FF2C077DA
6. Other
87