Konica Minolta bizhub C200 Service Manual page 340

Field Service Ver. 2.0 Dec. 2008
10.6.12 Unit Change
Functions • To select who is to replace a unit.
• When the unit life arrives, the warning display is intended for the specific person who
is going to replace the unit.
When "User" is selected
When "Service" is selected: Life warning.
Use • Upon setup
Setting/ <Unit Change>
Procedure • The following are the default settings:
Toner Cartridge
Imaging Unit
Waste Toner Box
10.6.13 Option Settings
Functions • To set the status for the optional stamp unit SP-503.
Use • To be used for setting up the stamp unit SP-503.
Setting/ • The default setting is "No."
Procedure
10.6.14 Center Erase Width
Functions • To set a default center shadow erase width in book copy mode.
Use • To change the default center shadow erase width in order to meet user's needs.
Setting/ • The default setting is "12.0 mm."
Procedure
: Printing is inhibited.
US, Japan, Others 2
: "User" Service
: User "Service"
: User "Service"
Yes
2.0 to 20.0 mm
10. Service Mode
Europe, Others1,3,4
"User" Service
"User" Service
"User" Service
"No"
299
1