Field Service Ver. 2.0 Dec. 2008
6.3.46
Fusing pressure roller retraction motor (M12)
1. Remove the paper exit rear cover.
See P.46
2. Remove the rear cover.
See P.47
[1]
[2]
6.3.47
Toner supply motor/CK (M7)
1. Remove the rear cover.
See P.47
[1]
[3]
A02FF2C082DA
[1]
[2]
A02EF2C178DA
[3]
[2]
A02FF2C083DA
3. Disconnect two connectors [1].
4. Remove three screws [2], and
remove the fusing pressure roller
retraction motor assy [3].
5. Remove two screws [1], and remove
the fusing pressure roller retraction
motor [2].
2. Disconnect the connector [2],
remove two screws [1], and remove
the toner supply motor/CK [3].
6. Other
95