Printer Settings - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
8.3.5

Printer Settings

A. Basic Settings
(1) PDL Setting
Functions • To set the PDL (Page Description Language) for PC printing.
Use • To fix the PDL as necessary. It usually switches automatically.
Setting/ • The default setting is Auto.
Procedure
(2) Number of Copies
Functions • To set the number to be copied when not specified by the printer driver during PC
printing.
Use • To use when the number cannot be specified by the printer driver during printing from
Windows DOS, etc.
Setting/ • The default setting is 1.
Procedure
(3) Original Direction
Functions
• To set the default setting for the direction of the original during PC printing.
Use
Setting/ • The default setting is Portrait.
Procedure
(4) A4/A3 ↔ LTR/LGR Auto Switch
Functions • To set whether to switch between A4 and Letter (8
Ledger (11 x 17) size paper in reading.
Use • To output Letter (8
ument to A3 size.
• To output A4 size document to Letter (8
ger (11 x 17) size.
NOTE
• When switching the size, the image will be printed in the same magnification.
• The image will not be reduced when there is image deficiency.
Setting/ • The default setting is ON.
Procedure
(5) Document Hold Time
Functions
• To set the period of time until it deletes the corresponding data when the memory
exceeds its capacity while spooling printed data.
Use
Setting/ • The default setting is 5 min.
Procedure
"Auto"
"Portrait"
1 / x 11) size document to A4 size, and Ledger (11 x 17) size doc-
2
"ON"
"5 M." (0 to 30 M.)
PCL
"1" (1 to 999)
Landscape
1 / x 11) size paper, and A3 and
2
/ x 11) size, and A3 size document to Led-
1
2
OFF
8. Utility Mode
PS
125