Firmware Rewriting By The Internet Isw; Outline; Service Environment; Preparations - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
8. Reinstall the cover of the slot.
9. Turn ON the main power switch and the sub power switch.
10. Select [Admin.] → [Firmware Version].
11. Check that the firmware version has been updated.
2.2

Firmware rewriting by the Internet ISW

1
2.2.1

Outline

• [Internet ISW] is the system which gives the instruction for updating the firmware with the
CS Remote Care, so the main body will automatically receive the firmware from the pro-
gram server over a network for updating.
2.2.2

Service environment

The following conditions are necessary for using the Internet ISW function.
• The main body is connected to such a network environment that the firmware can be
downloaded on the internet using the http protocol.
The "Internet ISW" will not operate under the following conditions.
• Main power switch is set to OFF.
• Sub power switch is set to OFF.
• The main body has the job currently performing.
• Modes other than normal mode are used.
• Machine has a paper jam.
• The version of firmware provided from the program server and MFBU board on the
machine are not compatible with each other.
2.2.3

Preparations

• For using the Internet ISW, the network parameter, program server address as well as
firewall address need to be set to the main body.
• For details of each setting item, refer to Adjustment/Setting "Internet ISW".
See P.315 of the main body service manual.
A. Internet ISW
1. Call the service mode to the screen.
2. Touch [Internet ISW]
2. Firmware upgrade
A02FF2E540DA
5
1