Transport Motor (M1) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
[2]
[1]
6.3.43

Transport motor (M1)

1. Remove the rear cover.
See P.47
[3]
[1]
A02FF2C126DA
[1]
A02FF2C516DA
[2]
[1]
A02FF2C079DA
6. Remove two screws [1], and remove
the inverter board [2].
7. To reinstall, reverse the order of
removal.
NOTE
• Take note of the housing method of
the two cables [1] of the inverter
board.
2. Remove four screws [1], disconnect
the connector [2], and remove the
transport motor [3].
6. Other
93