Setting Scan Transmission Function - Konica Minolta Di5510 User Manual

Network Function
Environment Setup Mode (continued)

Setting Scan Transmission Function

Follow the procedure below to register, change, or delete the address for the transmission
of the scanned image data using the web browser.
NOTE: Using Scan Transmission Setting in the Key Operator mode, you cannot newly register an E-mail/HDD/
FTP address or group the entries.
❒ The Scan Transmission Setting is available only when the optional Printer Controller is installed in
the machine.
Web Utilities Window
1 Open the Web Utilities window.
NOTE: See p. 11-18 for detailed procedure to access the Web Utilities.
2 Click on [ Environment Setup ].
3 Display the Scan Transmission Setting window.
Enter the 4-digit Key Operator password, then click on [ Apply ].
Click on [ Scan transmission setting ]. The Scan Transmission Setting window will be
displayed.
NOTE: The [Scan transmission setting] key appears in the window only when the optional Printer Controller
is installed in the machine.
11-30