Konica Minolta bizhub C200 Service Manual page 518

Field Service Ver. 2.0 Dec. 2008
(2) For scan/fax settings
Mode
000 • Specifying settings concerning the position of the transmission source information and
concerning password communications
001 • Specifying settings for inserting the recipient's name in the original
002 • Specifying printing of the memory clear report and the report for a broadcast transmis-
sion
004 • Specifying the storage time for failed transmission documents
016 • Specifying whether or not a received date report is added and its format
023 • Specifying settings for the TWAIN operation lock time and the image in the results report
1
024 • Specifying settings for administrator forwarding
025 • Specifying settings concerning transmission if the memory becomes full
028 • Specifying the maximum number of copies allowed with remote copying
030 • Specifying settings for fax reception functions
037 • Specifying the settings for selecting paper trays when faxes are received
043 • Specifying settings for general subscriber lines
249 • Specifying settings for the number of rings until automatic reception (port 2)
1
301 • Specifying settings for receiving long documents
302 • Specifying the setting for selecting paper when printing received documents
350 • Specifying settings concerning Internet faxing
351 • Specifying transmission source information for IP address fax transmissions and IP relay
operations
352 • Specifying whether transmission source information is added when performing a IP relay
operation, or when forwarding received documents
360 • Coding method for the receiver Internet fax capability (Network function, Mail mode)
1
363 • Specifying settings concerning the from address in MDN/DSN reports
366 • Specifying the default address input screen
368 • Specifying settings concerning IP relay operations appearing in the activity report
373 • Specifying settings concerning full mode functions with Internet faxing
381 • Specifying the default setting for the coding method
382 • Specifying settings concerning the communication results of IP relay operations
391 • File format, Coding format
1
473 • Specifying the Job list screen given priority
476 • Specifying settings concerning the direct input tab and broadcast transmissions
477 • Fax registration restriction and destination display, Setting confirmation screen for broad-
1
cast TX
478 • Specifying settings concerning the use of the button for deleting, the display when a one-
touch dial button is touched, and the default communication mode
804 • Specifying settings for checked receiver transmissions
(3) For printer settings
Mode
304 • Specifying the storage time for confidential documents
Setting item
Setting item
5. Utility Mode
21
1