Konica Minolta bizhub C200 Service Manual page 331

10. Service Mode
Mode
882
State
Bit
6 Color → B/W fallback function
5 Color Reception
4 Test scan
3 Calling port at the time of G3 fall back
1-0 Warm-up mode
*: In order to make this setting valid, main
power switch needs to be turned off and on
again twice.
Mode
883
State
Bit
3 Power save setting
2 LCT paper size
0 Optional original size detection sensor (BS)
290
Default value
Bit 7654 3210
1110 0000
Setting item
Default value
Bit 7654 3210
0000 0000 (for Europe)
0000 0100 (for U.S)
Setting item
Field Service Ver. 2.0 Dec. 2008
HEX: E0
Setting value
0 1
OFF ON
Not Sets whether to receive
Allowed
allowed color data or not.
Disable Enable
G3-1 G3-2
00 Mode 1
01 Mode 2
10 Mode 3
11 Mode 4
HEX: 00 (for Europe)
HEX: 04 (for U.S)
Setting value
0 1
Sets the method for shift-
ing to the power save
mode when operation is
Immedi- complete, in the case of
Normal
ately recovering from lower
power or sleep mode with
recovering condition of no
unit operation.
8 / x11
A4 1 Sets the LCT paper size.
2
Sets whether there is an
No Yes optional original size
detection sensor or not.
Description
Description