Page 1 Quick Guide [Copy/Print/Fax/Scan Operations] INDEX Introduction 1. Basic operations 2. Useful copy operations 3. Useful printing operations 4. Useful fax operations 5. Useful network scan operations 6. Troubleshooting 7. User Settings parameters 8. Index...
Page 2 Introduction This Quick Guide [Copy/Print/Fax/Scan Operations] uses illustrations to describe operating procedures for the most commonly used functions in an easy-to-understand way. Start by using this manual to become proficient with the useful functions that this machine offers. For details on the various functions, refer to the User’s Guides on the User’s Guide CD included with this machine.
Page 3: Energy Star
Energy Star® ® ® As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY STAR Guidelines for energy efficiency. What is an ENERGY STAR® Product? ® An ENERGY STAR product has a special feature that allows it to automatically switch to a "low-power ®...
Page 4: Trademarks And Copyrights
Trademarks and copyrights KONICA MINOLTA, the KONICA MINOLTA logo, and The essentials of imaging are registered trademarks of KONICA MINOLTA HOLDINGS, INC. bizhub is registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES INC. Netscape is a registered trademark of Netscape Communications Corporation in the United States and other countries.
Page 5 About License Granted to Each Software Component The GPL, LGPL or other licenses have been granted for some of the software components included in this product. Grateful acknowledgements are offered to the authors of that software as well as to members of the community engaged in data management and other activities concerning the software.
Page 6 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program"...
Page 7 The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
Page 8 NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 9 GNU Lesser General Public License Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Page 10 enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
Page 11 Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
Page 12 c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.
Page 13 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
Page 14 APPLE PUBLIC SOURCE LICENSE Version 2.0 - August 6, 2003 Please read this License carefully before downloading this software. By downloading or using this software, you are agreeing to be bound by the terms of this License. If you do not or cannot agree to the terms of this License, please do not download or use the software.
Page 15 2.2 Modified Code. You may modify Covered Code and use, reproduce, display, perform, internally distribute within Your organization, and Externally Deploy Your Modifications and Covered Code, for commercial or non-commercial purposes, provided that in each instance You also meet all of these conditions: (a) You must satisfy all the conditions of Section 2.1 with respect to the Source Code of the Covered Code;...
Page 16 MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. APPLE AND EACH CONTRIBUTOR DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE COVERED CODE, THAT THE FUNCTIONS CONTAINED IN THE COVERED CODE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE COVERED CODE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE COVERED CODE WILL BE CORRECTED.
Page 17 13.2 Relationship of Parties. This License will not be construed as creating an agency, partnership, joint venture or any other form of legal association between or among You, Apple or any Contributor, and You will not represent to the contrary, whether expressly, by implication, appearance or otherwise. 13.3 Independent Development.
Page 18 "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files. "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
Page 19 Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. 5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions.
Page 20 WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T.
Page 21 The implementation of The AES encryption algorithm in src/lib/crypto/aes has the following copyright: Copyright © 2001, Dr Brian Gladman <brg@gladman.uk.net>, Worcester, UK. All rights reserved. LICENSE TERMS The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that: distributions of this source code include the above copyright notice, this list of conditions and the following disclaimer;...
Page 22 Pure-FTPd License Pure-FTPd is covered by the following license : Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Frank Denis <j@pureftpd.org> with the help of all Pure- FTPd contributors. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Page 23 Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission.
Page 24 Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 25 (412) 268-4387, fax: (412) 268-7395 tech-transfer@andrew.cmu.edu Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/)." CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,...
Page 26 Note User’s Guide may not be reproduced in part or in full without permission. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. will not be held liable for any incidents caused by using this printing system or User’s Guide. Information included in User’s Guide is subject to change without notice.
Page 27: Software License Agreement
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. (KMBT): software included as part of the printing system ("Printing Software"), the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host...
Page 28: Table Of Contents
Contents Introduction ® Energy Star ................................x-2 Trademarks and copyrights..........................x-3 SOFTWARE LICENSE AGREEMENT ........................x-26 Contents ................................x-27 Safety information..............................x-29 Regulation notices ............................... x-33 Caution notations and labels ..........................x-38 Special Notice to User............................x-39 Space requirements ............................x-42 Operation precautions............................
Page 29 Sending documents with a command from the recipient ..............4-17 Reducing communication costs ......................4-19 Reducing communication costs (using the Internet/Intranet) ............4-21 Sending originals by e-mail .........................4-23 4.10 Reducing printing costs........................4-25 4.11 Sending confidential documents ......................4-27 4.12 Forwarding received data........................4-29 4.13 Faxing data directly from a computer ....................4-30 4.14 Registering one-touch destinations from a computer ..............4-31 Useful network scan operations...
Page 30: Safety Information
Safety information This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems.
Page 31 Power cord WARNING • Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUC- TION. Failure to use this cord could result in a fire or electrical shock. •...
Page 32 Power plug WARNING • Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result. • Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.
Page 33 Ventilation CAUTION • Using this product in a poorly ventilated room for a long time or producing a large volume of copies or prints may cause the odor of exhaust air from the machine. Ventilate the room well. Actions in response to troubles WARNING •...
Page 34: Regulation Notices
Regulation notices CE Marking (Declaration of Conformity) for users of the European Union (EU) This product complies with the following EU directives: 2006/95/EC, 2004/108/EC and 1999/5/EC directives. This declaration is valid for the area of the European Union. This device must be used with a shielded interface cable. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules.
Page 35 Laser Aperture of the Print Head Unit Print Head CDRH regulations This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S.
Page 36 For Finland, Sweden users LOUKAN 1 LASERLAITE KLASS 1 LASER APPARAT VAROITUS! Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle la-sersäteilylle. Tämä on puolijohdelaser. Laserdiodin sunrin teho on 15 mW ja aallonpituus on 770-800 nm. VARNING! Om apparaten används på...
Page 37 Laser safety label A laser safety label is attached to the outside of the machine, as shown below. *Only for the U.S.A. Ozone release Locate the Machine in a Well-Ventilated Room A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations.
Page 38 For EU member states only This symbol means: Do not dispose of this product together with your household waste! Please refer to the information of your local community or contact our dealers regrading the proper handling of end-of-life electric and electronic equipments. Recycling of this product will help to conserve natural resources and prevent potential negative consequences for the environment and human health caused by inappropriate waste handling.
Page 39: Caution Notations And Labels
Caution notations and labels Safety precaution notations and labels appear on this machine at the following positions. Be very careful that an accident does not occur when operations such as removing paper misfeeds are performed. WARNING Do not burn used CAUTION toner cartridges.
Page 40: Special Notice To User
If trouble is experienced with this equipment FK-507 and ML-504 , for repair or warranty information, please contact the Konica Minolta dealer location where you purchased this equipment. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 41 Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If you home has specially wired alarm equipment connected to the telephone line, ensure the installation of FK-507 and ML-504 does not disable you alarm equipment.
Page 42 For Europe The Facsimile has been approved in accordance with Council Decision 1999/5/ EC for pan-European single terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network terminal point.
Page 43: Space Requirements
Space requirements To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below. 1117 (44) 1261 (49-5/8) 113.5 (14-11/16) (7-7/8) 126.5 (5) 648 (25-1/2) (4-7/16) 688 (27-1/16) C200+DF-612+JS-505+PC-105+PC-204+MB-502 Unit: mm (inch) Reminder...
Page 44: Operation Precautions
Operation precautions To ensure the optimum performance of this machine, observe the precautions described below. Power source The power source requirements are as follows. Voltage fluctuation: Maximum ± 10% (at 110 V/120 V/127 V/110 to 127 V/220 to 240 V AC) Frequency fluctuation: Maximum ±...
Page 45: Legal Restrictions On Copying
Legal restrictions on copying Certain types of originals must never be copied with the purpose or intent to pass copies of such originals off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible copying. <Financial Instruments>...
Page 46: Introduction To The User's Guides
Introduction to the User’s Guides The User’s Guides for this machine include this book and the User’s Guide CD. This User’s Guide provided as book contains descriptions for immediately operating the machine. For detailed descriptions of functions or maintenance operations, refer to the User’s Guide on the User’s Guide Introduction to the book Quick Guide [Copy/Print/Fax/Scan Operations] This Quick Guide contains operating procedures and descriptions of the most frequently used functions,...
Page 47 User’s Guide [Network Administrator] This User’s Guide contains details on specifying settings for connecting and using this machine with a network, on changing software switch settings, and on using Assistant tool for C200. Refer to this User’s Guide for descriptions of the network settings, software switch settings and Assistant tool for C200.
Page 48: Available Features
Available features bizhub C200 is a digital color multifunctional peripheral that eases the workflow and satisfies any application or office environment. In addition to the copy, fax, scanning and printing functions essential to any business, this machine provides network functions to support efficient document management.
Page 49 Copy operations High-quality copies can be printed at a high speed. Vivid copies in color, black and white or any other single color can be produced to meet any need. The many Application functions greatly assist in reducing office costs and increasing efficiency. Print operations When printing from the computer, various settings can be specified, for example, the paper size, image quality, color tone and layout.
Page 50: Control Panel
Control panel The control panel consists of the touch panel, which can be used to specify settings for the various functions, and various keys, such as the [Start] key and the [Stop] key. The operations that can be performed with these keys are described below.
Page 51 Part name Description [C] (clear) key Press to erase a value (such as the number of copies, a zoom ratio, or a size) entered using the keypad. [Contrast] dial Use to adjust the contrast of the touch panel. [Enlarge Display] key Press to enter Enlarge Display mode.
Page 52: Turning The Machine On/Off
Turning the machine on/off This machine has two power controls: the main power switch and the sub power switch. Sub power switch Main power switch Main power switch This switch turns on/off all functions of the machine. Normally, the main power switch is turned on. Sub power switch Press to turn on/off machine operations.
Page 53 Detail When turning the machine off, then on again, wait at least 10 seconds to turn the machine on after turning it off. The machine may not operate correctly if it is turned on a short time after being turned off. Do not turn off the machine while it is printing, otherwise a paper misfeed may occur.
Page 54: Loading Paper
Loading paper Follow the procedure described below to load paper into the various paper trays. Loading paper into tray 1 Follow the procedure described below to load paper into tray 1. Slide the lateral guides to fit the size of paper to be loaded. –...
Page 55 Load the paper into the tray. – Load paper so that the surface to be printed on faces upward. – Do not load so many pages that the top of the stack is higher than the , mark. – Up to 250 sheets of plain paper can be loaded. x-54 C200...
Page 56 From the touch panel, select the paper type. – Press [↑] and [↓] until the desired paper type appears. – If label sheets are loaded, select "Thick 1". – If non-standard-size paper is loaded, specify the Paper Size setting. – For details on specifying the paper size and paper type settings, refer to chapter 6, "Copy paper/originals", of the User’s Guide [Copy Operations].
Page 57 Loading paper into tray 2/3/4 Follow the procedure described below to load paper into tray 2, tray 3 and tray 4. Trays 2, 3 and 4 are options. Slide the lateral guides to fit the size of paper to be loaded. x-56 C200...
Page 58 Load the paper into the tray. – Load paper so that the surface to be printed on faces upward. – Do not load so many pages that the top of the stack is higher than the , mark. – Up to 500 sheets of plain paper can be loaded. For details on the number of sheets of thick paper that can be loaded, refer to chapter 6, "Copy paper/originals", of the User’s Guide [Copy Operations].
Page 59 Load the paper into the tray. Press tray release button to pull out the LCT. Load the paper so that the surface to be printed on faces upward. Do not load so many pages that the top of the stack is higher than the , mark. Up to 2,500 sheets of plain paper can be loaded.
Page 60 Loading paper into the bypass tray Paper can be fed manually through the bypass tray when you wish to print onto paper of a size that is not loaded into a paper tray. The bypass tray is an option. Follow the procedure described below to load paper into the bypass tray. Open the bypass tray.
Page 61 – Press [↑] and [↓] until the desired paper type appears. – If label sheets are loaded, select "Thick 1". – If non-standard-size paper is loaded, specify the Paper Size setting. – For details on specifying the paper size and paper type settings, refer to chapter 6, "Copy paper/originals", of the User’s Guide [Copy Operations].
Page 62: Clearing Paper Misfeeds
Clearing paper misfeeds If a paper misfeed occurs, a screen like the one shown below appears with the location of the misfeed indicated. To clear the misfeed, check the location indicated in the screen, and then perform the necessary operation. A flashing “o”...
Page 63 Paper misfeed locations For details on misfeeds 1 through 11, refer to page x-63 of this manual and perform the appropriate operation. For details on misfeeds 12 and 13 (separator), refer to page x-64 of this manual and perform the appropriate operation.
Page 64 Clearing paper misfeeds (main unit) The following procedure describes how to clear paper misfeeds that have occurred in the ADF, upper right- side door or paper tray. 10 11 *The illustration above shows the main unit with the optional ADF, duplex unit, bypass tray, additional paper feed cabinet and double paper feed cabinet installed.
Page 65 7 CAUTION Precautions for toner spills. Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention.
Page 66: Replacing Consumables
Replacing consumables When it is time to replace consumables, for example, when the toner cartridge is empty or the waste toner box is full, a message appears, indicating the part that should be replaced. When the message appears, follow the corresponding procedure to replace the part. Toner cartridges Waste toner box Imaging units...
Page 67 When the toner is about to run out, the following message appears (If it is replaceable by the user.). Detail For details on the replacement procedure, refer to page x-67 of this manual. When the waste toner box is full, the following message appears (If it is replaceable by the user). Detail For details on the replacement procedure, refer to page x-68 of this manual.
Page 68 Replacing the toner cartridge The following procedure describes how to replace a toner cartridge. The procedure for replacing the toner cartridge is the same for all toner colors. As an example, the procedure for replacing the black toner cartridge is described. Note Before installing the new toner cartridge, shake it up and down five to ten times.
Page 69 7 CAUTION Precautions for toner spills Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water. If toner gets in your eyes, immediately flush them with water, and then seek professional medical attention.
Page 70 7 CAUTION Handling toner and the toner box Do not burn toner or the waste toner box. Toner expelled from the fire may cause burns. 7 CAUTION Precautions for toner spills Be careful not to spill toner inside the machine or get toner on your clothes or hands. If your hands become soiled with toner, immediately wash them with soap and water.
Page 71 Replacing an imaging unit The following procedure describes how to replace an imaging unit. Note When replacing an imaging unit, tilt the new imaging unit to the left and lightly shake it twice in the direction of the tilt, and then tilt the unit to the right and lightly shake it twice in the direction of the tilt. Keep used imaging units in their black plastic bags inside their boxes to be collected by your service representative.
Page 72: Options
Options This section describes the configuration of the options installed on this machine. By adding options, various office needs can be satisfied. Part name Description Main unit The document is scanned by the scanner section, and the scanned image is printed by the printer section.Referred to as the "machine", the "main unit", or the "C200"...
Page 73 Part name Description Desk DK-504 Allows this machine to be set up on the floor. Referred to as the desk throughout the manual. Job separator JS-505 When installed onto the output tray, it can be used for separating printed pag- Referred to as the "separator"...
Page 74: Basic Operations
Basic operations...
Page 75: Basic Copy Operation
Basic operations Basic operations Basic copy operation This section contains information on the general operation for copying. Position the original to be copied. – If a screen for entering the account name and password appears, type in the necessary information, and then touch [Login] or press the [Access] key .For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations].
Page 76 Basic operations – Simplex/Duplex: Change the setting when copying double-sided originals or making double-sided copies of single-sided originals. As a factory default, "1>1" is selected. – Recall Program: Programmed copy settings can be recalled to be used again for copying. –...
Page 77 Basic operations Press the [Start] key. – When using the original glass to scan multiple document pages, for example, when printing combined copies, position the second document page to be scanned, and then press the [Start] key. Repeat this process until all the pages have been scanned. After the last page has been scanned, touch [Finish], and then press the [Start] key.
Page 78: Basic Print Operation
Send print data from an application on the computer through the printer driver to this machine. The following printer drivers can be used with this machine. Windows: Konica Minolta PCL driver Konica Minolta PostScript driver Macintosh: OS X PostScript PPD driver...
Page 79 Basic operations Before printing In order to print, a printer driver must first be installed on the computer to be used. The printer driver can easily be installed with the installer on the enclosed CD-ROM. (for Windows) Detail In order to print, the network settings must first be specified. Network settings should be specified by the administrator.
Page 80 Basic operations – If necessary, display the printer driver settings dialog box, and then specify the printing settings. The specified pages and number of copies are printed. C200...
Page 81 Basic operations – If "Secure Print" was selected from the "Output Method" drop-down list in the printer driver, the print job is saved as a confidential document print job on this machine. Print the document by using the control panel of the machine. C200...
Page 82: Basic Fax Operation
Basic operations Basic fax operation This section contains information on the general operation for faxing. Change the mode. – If a screen for entering the account name and password appears, type in the necessary information, and then touch [Login] or press the [Access] key. For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations].
Page 83 Basic operations – When directly entering the fax number, touch [Dial], and then use the keypad to type in the number. – A original can be sent to multiple destinations at the same time (Broadcast transmission). For details on sending a original to multiple destinations, refer to page 4-9 of this manual. –...
Page 84 Basic operations Press the [Start] key. – When scanning more than one page of original using the original glass, place the 2nd page and then press the [Start] key. Repeat this process until all the pages have been scanned. After the last page has been scanned, touch [Finish], and then press the [Start] key. Detail To stop the transmission after the [Start] key was pressed, touch [Job List], then [Type], and then delete the job to be stopped.
Page 85: Basic Scan Operation
Basic operations Basic scan operation This section contains information on the general operation for sending scan data. Scan data transmissions An original scanned with this machine can be sent as a data file. There are the following transmission methods. Scan to E-mail: The scan data is sent as an attachment to an e-mail message. Scan to FTP: The scan data is sent to an FTP server.
Page 86 Basic operations – If a screen for entering the account name and password appears, type in the necessary information, and then touch [Login] or press the [Access] key. For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. Select the destination.
Page 87 Basic operations – If the optional fax kit has not been installed, [Address] appears instead of [Dial]. – A original can be sent to multiple destinations at the same time (Broadcast transmission). For details on sending a original to multiple destinations, refer to page 5-15 of this manual. –...
Page 88 Basic operations Press the [Start] key. – When scanning more than one page of original using the original glass, place the 2nd page and then press the [Start] key. Repeat this process until all the pages have been scanned. After the last page has been scanned, touch [Finish], and then press the [Start] key. Detail The network settings must be specified before scan data can be sent.
Page 89 Basic operations 1-16 C200...
Page 90: Useful Copy Operations
Useful copy operations...
Page 91: Reducing Paper Use While Copying
Useful copy operations Useful copy operations Reducing paper use while copying Double-sided copies (printing on both sides of the paper) and combined copies (reducing multiple pages and printing them together on a single sheet of paper) are convenient for reducing paper use and reducing office space needed for storage.
Page 92 Useful copy operations Detail Double-sided copying is available only if the optional duplex unit is installed. "2 > 1" and "2 > 2" are available only if the optional ADF is installed. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. Combined copies Select "2in1"...
Page 93 Useful copy operations If “4in1” is selected, the page arrangement can be selected. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. C200...
Page 94: Printing Copies Enlarged/Reduced On Paper With A Different Size
Useful copy operations Printing copies enlarged/reduced on paper with a different size Auto zoom Copies can be produced with the zoom ratio automatically selected based on the size of the loaded original and the specified paper size. Reminder When copying onto paper larger than the original, load the original with the same orientation as the paper.
Page 95 Useful copy operations If the "Auto" Zoom setting is selected, the "Auto Paper" setting cannot be selected. Select the paper tray loaded with the desired paper size. Note For details, refer to chapter 2, "Basic copy operations", of the User’s Guide [Copy Operations]. C200...
Page 96: Copying Onto Envelopes
Useful copy operations Copying onto envelopes Tray 1/Bypass tray Use the tray 1 or the bypass tray when copying onto envelopes. When copying onto envelopes, the orientation of the original and paper is extremely important. Position the original. C200...
Page 97 Useful copy operations Load the paper into the tray. – Load media into tray 1 with the side to be printed on facing up. Load media into the bypass tray with the side to be printed on facing down. C200...
Page 98 Useful copy operations Specify the paper type and size. – If envelopes are loaded, select the "Envelope" Paper Type setting. Select a size that matches the size of the envelope that is loaded. Note For details, refer to chapter 1, "Before making copies", of the User’s Guide [Copy Operations]. C200...
Page 99: Easily Recalling Frequently Used Functions
Useful copy operations Easily recalling frequently used functions Registering/recalling programs Frequently used functions can be registered as a copy program. The registered copy program can easily be recalled and used. Registering a program First, specify the functions to be registered. 2-10 C200...
Page 100 Useful copy operations Detail A maximum of 10 copy programs can be registered. Recalling a program C200 2-11...
Page 101 Useful copy operations Note For details, refer to chapter 3, "Additional copy operations", of the User’s Guide [Copy Operations]. 2-12 C200...
Page 102: Checking The Number Of Prints
Useful copy operations Checking the number of prints Meter Count The total number of printed pages and detailed counts of prints, such as the number of black-and-white prints, can be checked for various functions. C200 2-13...
Page 103 Useful copy operations The following information can be viewed on the Copy tab. Total: Displays the total number of pages copied using the "Black" setting, the "Full Color" setting, the "Single Color" setting, the "2 Color" setting, and the total for all Color settings. Large Size: Displays the total number of pages copied on large-sized paper using the "Black"...
Page 104: Reducing Electricity Usage
Useful copy operations Reducing electricity usage This machine is equipped with power save functions for conserving energy. Settings can be specified for these features from Administrator mode. LCD Back-Light OFF/Low Power mode/Sleep mode If no operation is performed on the machine for a specified length of time, the machine automatically enters a mode where it conserves energy.
Page 105 Useful copy operations 2-16 C200...
Page 106: Useful Printing Operations
Useful printing operations...
Page 107: Selecting The Paper
Useful printing operations Useful printing operations Selecting the paper Original Orientation Select "Portrait" or "Landscape" as the orientation for printing on the paper. Portrait Landscape Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Page Attributes Note For details, refer to chapter 7, "Print functions of the PCL/PS drivers for Windows", and chapter 8, "Print function of Mac OS X", of the User’s Guide [Print Operations].
Page 108 Useful printing operations Zoom Specify the enlargement or reduction ratio. The original is automatically enlarged or reduced to the size specified here when it differs from the "Original Size" setting and "Zoom" is set to "Auto". Original Reduce Enlarge Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Page Attributes Detail The Windows PCL/PS driver also has the "Thin Line Support"...
Page 109 Useful printing operations Note For details, refer to chapter 7, "Print functions of the PCL/PS drivers for Windows", and chapter 8, "Print function of Mac OS X", of the User’s Guide [Print Operations]. Copies and Collate/Offset When printing multiple copies, select the "Collate" function to print each copy as a complete set (1, 2, 3, ..., 1, 2, 3, ...).
Page 110: Managing And Limiting Printing
Useful printing operations Managing and limiting printing Secure Print A password can be specified for the document. This feature is useful for printing confidential documents since the document cannot be retrieved unless the password is entered from the machine’s control panel. Windows PCL/PS drivers: Basic tab Macintosh OS X driver: Output Method Detail...
Page 111: Reducing Paper Use While Printing
Useful printing operations Reducing paper use while printing Combination N in 1 printing, which reduces multiple document pages and prints them together on a single sheet of paper, is useful for economizing the number of printed pages. 2 in 1 4 in 1 6 in 1 9 in 1...
Page 112: Adjusting The Print Position
Useful printing operations Adjusting the print position Binding Direction and Binding Margin Specify the binding position for binding documents. With Windows PCL/PS driver, amount of page margins can also be adjusted. The binding margin can also be adjusted. Left bind Top bind Right bind Windows PCL/PS drivers: Layout tab...
Page 113: Adding Text And Images When Printing
Useful printing operations Adding text and images when printing Watermark The document can be printed overlapping a watermark (text stamp). Windows PCL/PS drivers: Stamp/Composition tab Note For details, refer to chapter 7, "Print functions of the PCL/PS drivers for Windows", of the User’s Guide [Print Operations].
Page 114: Adjusting The Image Quality
Useful printing operations Adjusting the image quality Select Color and Quality Adjustment The document can be printed in grayscale, or the image quality, such as the tone, can be adjusted. Printing in Printing with grayscale the settings for detail Windows PCL/PS drivers: Quality tab Macintosh OS X driver: Quality Note For details, refer to chapter 7, "Print functions of the PCL/PS drivers for Windows", and chapter 8, "Print...
Page 115: Using Printer Fonts
Useful printing operations Using printer fonts Font Settings The document can be printed with TrueType fonts replaced with printer fonts. Printer font (font 2) TrueType font (font 1) Windows PCL/PS drivers: Quality tab Detail When printer fonts are used, the printing time is reduced, but there may be a difference between the displayed document and the print result.
Page 116: Useful Fax Operations
Useful fax operations...
Page 117: Registering Frequently Used Fax Numbers
Useful fax operations Useful fax operations Registering frequently used fax numbers Frequently used destinations can be registered. One-Touch By registering a frequently used destination in the One-Touch, the destination can be recalled simply with the touch of an One-Touch button. Selecting a button to be programmed C200...
Page 118 Useful fax operations Touch the button to be programmed Note If an LDAP server has been registered to be searched, an address registered on the LDAP server can be registered as a one-touch destination. Registering a fax number C200...
Page 119 Useful fax operations To register a fax number, touch [Fax]. Using the keypad, type in the fax number to be registered. Note For details, refer to chapter 2, "Control panel/touch panel", and chapter 8, "User Settings/User Management/One-Touch/Box Reg.", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200...
Page 120 Useful fax operations Registering the Program Scanning settings, transmission settings and destination can be registered with a single button. Detail The destination can be specified by touching a one-touch dial button. Specifying settings, such as those on the Quality, Fax Menu and Dial tabs. C200...
Page 121 Useful fax operations Touch the button to be programmed. Note For details, refer to chapter 8, "User Settings/User Management/One-Touch/Box Reg.", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200...
Page 122: Checking Fax Operations Performed Until Now
Useful fax operations Checking fax operations performed until now Communication list A log of the transmissions and receptions can be viewed in a report and printed. The transmission report, reception report and activity report, which combines the transmission and reception reports, are available in the communication list.
Page 123 Useful fax operations Detail The activity report is printed after 50 transmission and reception jobs have been performed. The transmission report and reception report can be printed periodically. Settings for printing reports are specified from the Administrator Management screen. Documents that could not be sent can be selected from the job list and sent manually. For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 124: Transmitting To Multiple Recipients At The Same Time
Useful fax operations Transmitting to multiple recipients at the same time A original can be sent to multiple recipients with a single operation. This is called a "broadcast transmission". Broadcast transmission Recipients can be specified for broadcast transmissions by typing in the destination using the keypad or by selecting from One-Touch.
Page 125 Useful fax operations 4-10 C200...
Page 126 Useful fax operations Entering a destination with the keypad Touch [Add] to display a screen for entering the second destination. C200 4-11...
Page 127 Useful fax operations Detail A maximum of 210 destinations can be specified. A maximum of 12 destinations can be specified when the keypad is used. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan /Fax/Network Fax Operations].
Page 128: Selecting Registered Transmission Source Information
Useful fax operations Selecting registered transmission source information Fax transmission source information settings Registered transmission source information (transmission source name and fax ID) can be selected and changed. From : User01 From : Group03 C200 4-13...
Page 129 Useful fax operations Detail The transmission source information is specified in Administrator Management screen. Check with the machine’s administrator for the administrator password. The transmission source information is registered by the administrator. Check with the machine’s administrator for registered information. The administrator can set the position for printing the transmission source information on the outside or inside of the original.
Page 130: Scanning The Originals To Be Sent
Useful fax operations Scanning the originals to be sent Quality From the Quality screen, settings such as the image quality, resolution and density of the scanned original can be changed. Parameter Description Density Select whether to darken or lighten the colors of the scan data. Color This parameter is not available when sending to a fax number.
Page 131 Useful fax operations Quality Parameter Description Quality The original can be scanned according to its contents. Resolution The larger the numbers, the clearer the image. Reduction/Area Parameter Description Zoom The zoom ratio can be selected automatically based on the size of pa- per loaded in the recipient’s machine, or the document can be cut to fit the paper size (no reduction).
Page 132: Sending Documents With A Command From The Recipient
Useful fax operations Sending documents with a command from the recipient Polling transmission Saving the data for scanned originals on the sender’s machine and sending it with a request from the recipient is called "polling transmission". A document sent using this machine’s "Polling TX" function is stored in this machine’s memory and is sent when a request is received from the recipient.
Page 133 Useful fax operations To specify the density and transmission settings, touch [Next]. Detail With polling transmissions, the receiver incurs the cost of the transmission. To request that a machine sends data saved with a polling transmission, touch [Polling RX] on the Application tab of the Fax Menu tab, and then specify the sender in order to receive the data.
Page 134: Reducing Communication Costs
Useful fax operations Reducing communication costs Transmitting using late-night transmission cost (timer transmission) Destination settings can be specified and the original can be scanned during the day, and the transmission can be sent at the specified time late at night when the telephone charges are lower. The scanned original is sent at the specified time.
Page 135 Useful fax operations Detail 2in1 transmission is available only if the optional ADF is installed. Only A5-, B5-, and A4-size documents are compatible with 2in1 transmissions. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 136: Reducing Communication Costs (Using The Internet/Intranet)
Detail Before IP address faxing can be used, various settings must be specified by the administrator. IP address faxing is available only between the compatible models of Konica Minolta. We cannot guarantee proper operation other than the compatible models. C200...
Page 137 Useful fax operations Detail For details, refer to chapter 1, "Before using Network Scan/Fax/Network Fax functions", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. IP relay A fax can be sent through a relay station connected to the LAN. If a relay station in the intranet is connected a telephone line, a fax can be sent from any of the machines connected to the LAN.
Page 138: Sending Originals By E-Mail
Useful fax operations Sending originals by e-mail Internet faxing Using the Internet, a scanned original can be sent as an e-mail attachment. The transmission costs are included in the Internet charges. Selecting from One-Touch Entering a destination with the keypad In order to send an Internet fax, specify Network Fax and Internet...
Page 139 Useful fax operations Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. 4-24 C200...
Page 140: Reducing Printing Costs
Useful fax operations 4.10 Reducing printing costs Document Management (Memory RX) Received faxes can be saved in user box as data and printed when they are needed. Printing only the necessary fax documents among all the received fax documents enhances security and reduces printing costs.
Page 141 Useful fax operations Select the fax data to be printed. Detail A password can be specified for the RX Document user box. Specify document management settings from the Administrator Management screen. The administrator password is required to specify the settings. Note For details, refer to chapter 6, "Useful functions (G3/IP/I-FAX)", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 142: Sending Confidential Documents
Useful fax operations 4.11 Sending confidential documents F-Code transmission When sending documents, a confidential user box (SUB) and the transmission password (SID/PWD) can be specified in addition to the fax number of the destination to preserve the confidentiality of the document. C200 4-27...
Page 143 Useful fax operations Detail In order to perform an F-code transmission, a confidential box and transmission password must be specified on the recipient’s fax machine. An F-code transmission can be used only if the recipient’s fax machine supports F-code functions. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 144: Forwarding Received Data
Useful fax operations 4.12 Forwarding received data Document Management (Forward) Received fax data can be forwarded to a previously specified destination. Detail Specify document management settings from the Administrator Management screen. The administrator password is required to specify the settings. From the Administrator Management screen, settings can also be specified to forward received fax data and print the data with this machine.
Page 145: Faxing Data Directly From A Computer
Useful fax operations 4.13 Faxing data directly from a computer Computer faxing Data created on the computer can be sent to a destination fax machine with the same settings as if it is printed. In order to use computer faxing, the fax driver must be installed. The fax document settings can be specified.
Page 146: Registering One-Touch Destinations From A Computer
Useful fax operations 4.14 Registering one-touch destinations from a computer Assistant tool for C200 By using Assistant tool for C200, one-touch destinations and fax programs can be registered from the computer at your desk. Enter the IP address of this machine in the "Address bar" of the Web browser to use Assistant tool for C200 to connect with this machine.
Page 147 Useful fax operations 4-32 C200...
Page 148: Useful Network Scan Operations
Useful network scan operations...
Page 149: Registering Frequently Used Destinations
Useful network scan operations Useful network scan operations Registering frequently used destinations Frequently used destinations can be registered. One-Touch By registering a frequently used destination in the One-Touch, the destination can be recalled simply with the touch of an One-Touch button. Selecting a button to be programmed C200...
Page 150 Useful network scan operations Touch the button to be programmed Note If an LDAP server has been registered to be searched, an address registered on the LDAP server can be registered as a one-touch destination. Registering an e-mail address C200...
Page 151 Useful network scan operations To register an e-mail address, specify PC and E-Mail settings. Note For details, refer to chapter 2, "Control panel/touch panel", and chapter 8, "User Settings/User Management/One-Touch/Box Reg.", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200...
Page 152 Useful network scan operations Registering the Program Scanning settings, transmission settings and destination can be registered with a single button. Detail The destination can be specified by touching a one-touch dial button. Specifying settings, such as those on the Quality, Fax Menu and Dial tabs. C200...
Page 153 Useful network scan operations Touch the button to be programmed. Note For details, refer to chapter 8, "User Settings/User Management/One-Touch/Box Reg.", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200...
Page 154: Transmitting Fine Text And Clean Images
Useful network scan operations Transmitting fine text and clean images The amount of details (resolution) and the scanning method (according to whether the original contains text or images) can be specified when scanning an original. An original of good quality can be sent by using a combination of these settings.
Page 155 Useful network scan operations Detail The higher the resolution, the larger the data becomes. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200...
Page 156 Useful network scan operations Selecting an Original Type setting Select the appropriate scanning method for the text and image type of the original. Parameter Description Text Select this setting for originals consisting only of text. C200...
Page 157 Useful network scan operations Parameter Description Photo Select this setting for originals consisting only of photos. Text/Photo Select this setting for originals consisting of both text and photos. Select this setting for originals containing pencil markings or fine color- ed lines or originals with a background color, such as maps. Dot Matrix Select this setting for originals consisting of text that generally appears faint.
Page 158: Transmitting With The Selected Color And File Type Settings
Useful network scan operations Transmitting with the selected Color and File Type settings Selecting the Color and File Type settings Color C200 5-11...
Page 159 Useful network scan operations File Type File type Description This type of file can be displayed in Adobe Reader. JPEG Select this setting to save data in the JPEG format. One file is created for each page of the original. TIFF Select this setting to save data in the TIFF format.
Page 160: Transmitting With The Background Color Adjusted
Useful network scan operations Transmitting with the background color adjusted Background Adjustment When scanning a original with a colored background, a cleaner scan can be created by lightening the background. C200 5-13...
Page 161 Useful network scan operations Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. 5-14 C200...
Page 162: Transmitting To Multiple Recipients
Useful network scan operations Transmitting to multiple recipients Searching for a registered destination Select the destinations where the data is to be sent. C200 5-15...
Page 163 Useful network scan operations A destination can also be typed in directly from the Dial tab. A registered destination can be searched for and selected. 5-16 C200...
Page 164 Useful network scan operations If an LDAP server has been registered in Administrator mode, destinations registered on the LDAP server can be searched for. For details on registering and searching LDAP servers, refer to the User's Guide [Network Scan/Fax/Network Fax Operations]. Program, which are multiple destinations that have previously been registered together, can be useful when selecting destinations.
Page 165: Sending Documents By E-Mail
Useful network scan operations Sending documents by e-mail E-mail transmissions Scan data can be sent as an e-mail attachment simply by specifying the e-mail address. Select a registered destination, or directly type in the e-mail address. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 166 Useful network scan operations Subject Selection: The subject of the e-mail message can be changed. Subjects can be registered from the Administrator Management screen. File Name: The name of the attached file can be changed. Note For details, refer to chapter 4, "Transmitting data", of the User’s Guide [Network Scan/Fax/Network Fax Operations].
Page 167: Checking Transmissions Performed Until Now
Useful network scan operations Checking transmissions performed until now Job List (Type) Details of transmission jobs and their transmission results are displayed. The transmission jobs that are displayed can be selected. RX Doc.: Details of reception jobs and their reception results are displayed. 5-20 C200...
Page 168 Useful network scan operations Note For details, refer to chapter 2, "Control panel/touch panel", of the User’s Guide [Network Scan/Fax/Network Fax Operations]. C200 5-21...
Page 169 Useful network scan operations 5-22 C200...
Page 170: Troubleshooting
Troubleshooting...
Page 171 Troubleshooting Troubleshooting Troubleshooting This section describes common troubleshooting procedures in a question and answer format. If the problem is not corrected, even after performing the described procedure, contact your service representative. Why can’t the machine be turned on? This machine has two switches. Answer Check for the following.
Page 172 Troubleshooting Answer Check for the following. Use the [Contrast] dial in the control panel to adjust the brightness of the screen in the touch panel. Touch the touch panel. There is no problem if the touch panel lights up. When the machine is in Power Save mode, touching the touch panel or pressing a key in the control panel cancels Power Save mode.
Page 173 Troubleshooting Why does a message appear, indicating that consumables must be replaced? When the consumables used by the machine are nearly empty, a warning about the replacement period appears. Answer Replace the specified consumable. The consumable is empty when a message appears, indicating that the consumable be replaced. Copying is possible for a short time after the message appears, but the consumables should be prepared soon.
Page 174 Troubleshooting Answer Check for the following. Check that no torn paper remains in the part indicated by o in the touch panel screen. If the paper could not be removed, contact your service representative. Open, then close the door indicated by o in the touch panel screen. The message may not remain displayed after this operation is performed.
Page 175 Troubleshooting Why did an error message appear? If the malfunction that occurred cannot be corrected by the user, the message "Malfunction detected. Inform the service representative of the error code." appears. (call service representative screen) Answer Note the trouble code that appeared in the screen, unplug the machine from the electrical outlet, and then contact the service representative.
Page 176: User Settings Parameters
User Settings parameters...
Page 177: Displaying The User Settings Screen
User Settings parameters User Settings parameters With the User Settings parameters, common machine settings and settings for specific functions can be changed according to the operating conditions and environment. Displaying the User Settings screen Various settings can be specified from the User Settings screen. Note For details, refer to chapter 11, "Utility mode", of the User’s Guide [Copy Operations].
Page 178: Settings That Can Be Specified
User Settings parameters Settings that can be specified Settings can be specified for parameters in the following six categories on the User Settings screen. Note For details on the Copier Settings parameters, refer to chapter 11, "Utility mode", of the User’s Guide [Copy Operations].
Page 179 User Settings parameters Display Settings The first screen that is displayed before the machine is operated is called the standby screen. The screen displayed for the standby screen can be selected. Default Settings The default settings in Copy mode and Fax/Scan mode can be changed. Copier Settings The settings for copy functions can be changed so that the operations can easily be performed.
Page 180 User Settings parameters Printer Settings The settings for print functions can be changed so that the operations can easily be performed. Account Track Registration This appears when account track settings have been specified and a user has logged on with a registered account.
Page 181 User Settings parameters C200...
Page 182: Index
Index...
Page 183 Index Index Numerics IP address faxing ..........4-21 IP relay ..............4-22 2in1 transmission ..........4-19 Job List ..............5-20 Account track ............3-5 Assistant tool for C200 ........4-31 Auto zoom ............. 2-5 LCD Back-Light OFF ........... 2-15 Loading paper into tray 1 ........x-53 Loading paper into tray 2/3/4 ......
Page 184 Index Trademarks and copyright ........x-3 Troubleshooting ............ 6-2 Turning on/off ............x-51 User settings ............7-2 Watermark ............3-8 Zoom ..............3-3 C200...
Page 185 Index C200...
Page 186 http://konicaminolta.com Printed in China Copyright A02F-9591-11 2008 2008.11...

Konica Minolta bizhub C200 Quick Manual

Energy Star

Trademarks and Copyrights

Software License Agreement

Safety Information

Regulation Notices

Caution Notations and Labels

Special Notice to User

Space Requirements

Operation Precautions

Legal Restrictions on Copying

Introduction to the User's Guides

Available Features

Control Panel

Turning the Machine On/Off

Loading Paper

Clearing Paper Misfeeds

Replacing Consumables

Options

1 Basic Operations

2 Useful Copy Operations

3 Useful Printing Operations

4 Useful Fax Operations

5 Useful Network Scan Operations

6 Troubleshooting

7 User Settings Parameters

8 Index

Quick Links

Related Manuals for Konica Minolta bizhub C200

Summary of Contents for Konica Minolta bizhub C200

Table of Contents