Konica Minolta bizhub C200 Service Manual page 272

Field Service Ver. 2.0 Dec. 2008
Mode
350
State
Bit
6 POP3 before SMTP
5-4 Maximum width of document to be transmit-
ted when the fax capability of the receiver is
set to [Advanced]
(Network function)
3-2 Maximum resolution to be used when the fax
capability of the receiver is set to [Advanced]
(Network function)
Mode
351
State
Bit
7 Gateway transmission (Network function)
6-5 Outgoing port for gateway transmission (Net-
work function)
Specify an outgoing port for fax transfer (fax
transfer of received e-mail file) through gate-
way transmission.
(valid for G3 multi-port only) [See note.]
3 Gateway TSI
Default value
Bit 7654 3210
0010 1000
Setting item
Default value
Bit 7654 3210
0001 1100
Setting item
HEX: 28
Setting value
0 1
No Yes
00 A4
01 B4
10 A3
Not avail-
11
able
200 x 200
00
dpi
400 x 400
01
dpi
600 x 600
10
dpi
Not avail-
11
able
HEX: 1C
Setting value
0 1
Specify allowed or not
allowed for sending e-mail
using gateway communi-
cations.
Not If "Not allowed", SMTP
Allowed
allowed reception is executed,
however gateway trans-
mission is not executed,
and received data is
printed.
00 G3-1
11 G3-2
others Not available
Normally Normally
not add add
10. Service Mode
Description
Default
value of
maximum
width of
document to
be transmit-
ted
Default
value of
maximum
resolution to
be used
Description
231