Konica Minolta bizhub C200 Service Manual page 149

6. Other
9. Route wires as shown below.
10. Reinstall the exposure unit.
NOTE
• When fixing the wire bracket at the exposure unit front, align with the memory
position when removing.
11. After mounting, while taking copy images, adjust the wire bracket fixing position at the
exposure unit front so as to prevent tilting.
12. After tilt adjustment, attach the screw lock to the wire bracket (front), and fix it.
13. If the leading edge or zoom ratio deviates, perform the following settings.
[Service Mode] → [Machine Adjustment] → [Scan Area] → [BK-S Adjustment]]
108
Field Service Ver. 2.0 Dec. 2008
A02FF2C519DA