Konica Minolta bizhub C200 Service Manual page 188

Field Service Ver. 2.0 Dec. 2008
(6) Gateway TX
Functions • To set items concerning Gateway TX.
• To set to [Allow] when using the main machine as the relay unit for IP relay, and set to
Use
[Restrict] when not using it as the relay unit for IP relay.
Setting/ • The default setting is Allow.
Procedure
H. LDAP Settings
1
Functions • To set whether to enable or disable the LDAP function.
Use • To use LDAP function.
Setting/ • The default setting is No.
Procedure
(1) Setting Up LDAP
• Registration and/or setting concerning the LDAP server can be conducted.
• Touch [Setting Up LDAP], and select the optional blank key to register and/or set.
<Server Name>
Functions
• Set the LDAP server name.
Use
Setting/ 1. Touch [Server Name].
Procedure 2. Enter the server name (up to 32 one-byte characters) on the on-screen keyboard,
and touch [OK].
<Server Address>
Functions • To set the LDAP server address.
Use • To enter LDAP server address.
Setting/ 1. Touch [Server Address].
Procedure 2. Select [Host Name] or [IP Input], and enter the server address.
<SSL Setting>
Functions • To set whether to use SSL (data encryption) for connecting to LDAP server.
Use • To use SSL (data encryption) for connecting to LDAP server.
Setting/ • The default setting is OFF.
Procedure
<Port Number>
Functions • To set the LDAP server port number.
Use • To enter the LDAP server port number.
Setting/ 1. Touch [Port Number].
Procedure 2. Enter the port number between 1 and 65535 using the 10-key pad.
"Allow"
Yes
ON
8. Utility Mode
Restrict
"No"
"OFF"
147
1