Table of Contents
Advertisement
7
7.20
(19) Scan Transmission Object Change/Delete
(only possible if IP Printer Controller Pi6500e is installed – optional)
For more information, refer to the operating instructions for the Printer
Controller Pi6500e.
7.21
(20) Non-Image Erase Area Setting
Set the type of non-image area erase.
1
Call up key operator mode.
The key operator mode menu is displayed.
2
Press the down arrow key on the lower edge of the touch screen.
The second page of the key operator mode menu is displayed.
3
In the key operator mode menu press the [19] Non-image area erase
setting key.
The image store password list is displayed.
4
Select the type of non-image area erase.
or
Press the [AUTO] key. The type of non-image area erase and the
original density will be selected in accordance with the detected
original.
5
Confirm your selection by pressing [OK].
6
Press the [RETURN] key.
The key operator mode menu is displayed again.
7-66
Settings in Key Operator Mode
Di551/Di650
Advertisement
Table of Contents
