2. Other
2.3.10
Paper feed motor (M1)
1. Slide out the tray 2.
2. Remove the rear right cover.
See P.5
3. Remove the rear left cover.
See P.5
[1]
[1]
[2]
16
[2]
[1]
4067F2C019DA
[2]
4067F2C021DA
4067F2C022DA
Field Service Ver. 1.0 Jun. 2008
4. Remove two screws [1], and remove
the reinforcement plate [2].
5. Remove the motor assy harness
from the five wiring saddles [1].
6. Disconnect two connectors [2].
7. Remove two screws [1], and remove
the motor assy [2].