Konica Minolta bizhub C200 Service Manual page 765

7. Trouble code
Code
C0214 LCT shifting failure
C0215 LCT shift motor malfunction
• Open and close the front door, or turn OFF the main power switch. Then, wait for 10 sec.
or more and turn ON the main power switch to reset the malfunction display.
34
Item
• The shift tray stop sensor (PS11) is not blocked even
after the set period of time has elapsed after the shift
operation began (shift to the right).
• The shift tray stop sensor (PS11) is not blocked even
after the set pulse is detected by the shift motor pulse
sensor (PS8) after the shift operation began (shift to the
right).
• The shift tray home sensor (PS12) is not unblocked
even after the set pulse is detected by the shift motor
pulse sensor (PS8) after the shift operation began (shift
to the right).
• The shift tray home sensor (PS12) is not blocked even
after the set period of time has elapsed after the return
operation began (shift to the left).
• The shift tray home sensor (PS12) is not blocked even
after the set pulse is detected by the shift motor pulse
sensor (PS8) after the return operation began (shift to
the left).
• The shift tray stop sensor (PS11) is not unblocked even
after the set pulse is detected by the shift motor pulse
sensor (PS8) after the return operation began (shift to
the left).
• The shift motor pulse sensor (PS8) cannot detect both
edges of H/L even after the set period of time has
elapsed while the shift motor (M4) is turning backward/
forward (raise/lower).
Field Service Ver. 2.0 Dec. 2008
Description