Konica Minolta bizhub C200 Service Manual page 176

Field Service Ver. 2.0 Dec. 2008
<Image Stabilization>
Functions • The image stabilization sequence is carried out without clearing the historical data of
image stabilization control.
Use • Use if an image problem persists even after [Gradation Adjustment] has been exe-
cuted.
• When [D Max Density] and [Background Voltage Margin] of Service Mode are
changed.
Setting/ 1. Call the Admin. to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Image Stabilization] → [Image
Procedure
Stabilization].
3. Press the Start key to start image stabilization.
The Start key turns red and stays lit up red during the image stabilization sequence.
4. Image stabilization is completed when the Start key turns blue.
8. Utility Mode
135