Tim. Roller Clutch (Cl1); Idc Registration Sensor/Mk (Idcs/Mk), Idc Registration Sensor/Yc (Idcs/Yc) - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 2.0 Dec. 2008
[1]
6.3.52

Tim. roller clutch (CL1)

1. Remove the vertical transport unit.
See the steps 1 to 7 of IDC registration sensor removing procedure.
See P.99
[3]
[2]
6.3.53 IDC registration sensor/MK (IDCS/MK),
IDC registration sensor/YC (IDCS/YC)
1. Remove the transfer belt unit.
See P.24
[1]
[2]
A02FF2C088DA
[1]
A02EF2C200DA
A02FF2C089DA
4. Disconnect the connector [1], and
remove the developing clutch/K [2].
2. Disconnect the connector [1],
remove the E-ring [2], and remove
the tim. roller clutch [3].
2. Remove the shoulder screw [1].
6. Other
99