Trouble Code; Solution; C0204: Tray2 Lift-Up Failure - Konica Minolta bizhub C200 Service Manual

Hide thumbs Also See for bizhub C200:

Table of Contents

Field Service Ver. 1.0 Jun. 2008

Trouble code

Trouble code

• The main unit's CPU performs a self-diagnostics function that, on detecting a malfunc-

tion, gives the corresponding malfunction code on the touch panel.

Tray2 lift-up failure

• Open and close the front door, or turn OFF the main power switch. Then, wait for 10 sec.

or more and turn ON the main power switch to reset the malfunction display.

Lift-up motor (M3)

Lift-up limit sensor (PS7)

Check the motor and sensor connectors

for proper connection, and correct as nec-

Check the connector of each motor for

proper drive coupling, and correct as nec-

Check the DCPU connector for proper

connection, and correct as necessary.

PS7 I/O check, sensor check

M3 operation check

PCCB replacement

PRCB replacement

• The lift-up limit sensor (PS7) is not blocked even after

the set period of time has elapsed after the paper lift-up

operation for the drawer began.

Relevant electrical parts

PC control board (PCCB)

Printer control board (PRCB)

WIRING DIAGRAM

Control signal

PCCB PJ6-3 (ON)

PCCB PJ4-4 to 5

7. Trouble code

Table of Contents