Table of Contents
Advertisement
Chapter 4 Making copies
Features
The following information describes the special features of the Konica
1312 Copier.
Auto Clear Function
If no settings are entered on the control panel for a specified period
of time, all previous settings will be cleared and default values
shown below will be resumed automatically.
Default Settings
Print quantity
Copy magnification : 1 : 1
Paper tray
NOTE:
You can change the elapse time of the Auto Clear function to 30,
60, 90, or 120 seconds. See p. 4-8 to p. 4-10.
Power Save Mode
If no command is entered on the control panel for a specific period
of time, the temperature of the fixing unit will be lowered automati-
cally to reduce power consumption. The Power Save feature will
help you conserve energy.
In the Power Save mode, only the READY indicator is on and all
other lamps are off. To return the copier to the READY mode, press
any button on the control panel.
You can change the elapse time of the Power Save function to 2, 5,
30, 60, 120 or 240 minutes. Contact your Konica service repre-
sentative if you wish to change Power Save settings. The default
setting is 30 minutes.
Copy Counter
This feature allows you to view the total number of the copies made
on the machine by displaying the amount in the Print quantity/
Magnification ratio window (see procedure on p. 4-8 to p. 4-10).
: 1
: Main body tray
4-7
Advertisement
Table of Contents
