Specifying Default Settings ("User's Choice" Functions); User's Choice: 1 Screens - Konica Minolta 8031 Instruction Manual

5.2 Specifying Default Settings ("User's Choice" Functions)

5.2 Specifying Default Settings ("User's Choice"
Functions)
With the User's Choice function, the initial mode settings can be customized
according to how the copier is to be used.

User's Choice: 1 Screens

G This function is used to specify whether or not a confirmation beep is sounded
each time a key in the operation panel is pressed.
G
This function is used to set the current date and time.
G This function is used to set the memory recall feature, which allows settings
from past copy jobs to be recalled.
G This function is used to specify the length of time until the repeat feature for a
key starts and the length of the time that a key must be held down between
subsequent repeats.
G
This function is used to specify the length of time after the last operation until all
functions return to their default settings.
G
This function is used to specify the length of time after the last operation until
the copier automatically enters Low Power mode.
G This function is used to specify the length of time after the last operation until
the copier automatically enters Shut off mode.
Konica 8020/8031
(Refer to p. 5-10)
(Refer to p. 5-11)
(Refer to p. 5-13)
(Refer to p. 5-15)
(Refer to p. 5-16)
(Refer to p. 5-17)
(Refer to p. 5-18)
5
5-7