Chapter 4 Making copies
Function Settings
Setting changes can be made for the four functions shown below. See
function setting options and codes on p. 4-10.
Setting Paper Size
Change the paper size setting whenever you need to load a differ-
ent size copy paper in a tray.
Setting Auto Clear Function
Set the time period for activating the auto clear function.
Initializing Drum/Developer
Initialize the drum every time you replace the drum unit.
Initialize the developing unit, when you install the copier initially and
every time you replace the developing unit.
Setting Automatic Check of Paper Length
Set the automatic detection setting.
Setting Procedure
Before starting, be sure the copier is in the READY state.
1. Press [SELECT PAPER] for five
seconds.
All settings previously made will be
cleared and the copier default
settings will be resumed.
2. Referring to the table on p. 4-10,
enter the desired code using the
keypad.
Ex.: [2] [0]
4-8
Lighter Normal Darker
SELECT PAPER
4
5
9
0
RECALL
STOP/CLEAR
START P