Installing The 19" Controlling Chassis - NEC Univerge SV9100 Hardware Manual

Issue 1.2
3 - 2
Figure 3-1 CHS2UG Chassis (Front View)
Universal Slot for Legacy Line/Trunk blades and
Application blades (six slots). When used as
controlling chassis, the GCD-CP10 is mounted in Slot
Figure 3-2 CHS2UG Chassis (Rear View)
Internal Battery Mount
1.1.1

Installing the 19" Controlling Chassis

1. Ensure the chassis is powered down.
2. Align the GCD-CP10 blade with the Slot 1 guides of the Controlling
1 (shown).
Slot for GPZ-BS10/GPZ-BS11 blade
– Connection with CHS2UG chassis
Power Switch
Fan Unit
(inside of cover)
Battery Connector
(inside of cover)
Do not remove or install blades with the power on.
UNIVERGE SV9100
AC Connector
Frame Ground
(FG) Terminal
Installing the SV9100 Chassis