Removing The Faceplate; Replacing The Faceplate - NEC Univerge SV9100 Hardware Manual

Issue 1.2
6 - 28
10.1.1

Removing the Faceplate

1. Use the small notch at the lower right corner of the telephone,
to lift the faceplate up.
Each corner has a plastic locking pin which releases as

the faceplate is lifted up.
10.1.2

Replacing the Faceplate

1. Place the faceplate back on the telephone.
2. At each corner, press the locking pin back into place.
Figure 6-18 Removing the Faceplate
Installing SV9100 Optional Equipment
UNIVERGE SV9100