UNIVERGE SV9100
System Hardware Manual
Wall Mounting the 9.5 inch ( CHS2UG ) Chassis
2.2.2
Figure 3-35 Wall Mount Spacing Guide (9.5" Chassis)
1.
Use the template shown above for required spacing before drilling.
2.
Mark and drill four holes marked A, B, C and D.
3.
Mount Anchor bolts (locally procured), in holes A and B drilled in step
2.
Because the bracket (upper) will be hooked onto the head of the
è
anchor bolts, allow the head to protrude approximately 0.14 to 15
in (3.5 to 4.0mm) from the wall (refer to
from Wall (9.5" Chassis) on page
Issue 1.2
(Figure 3-36 Anchor Bolt
3-28).
3 - 27