Issue 1.2
5 - 68
5-61 Attach Tilt Legs to Multiline
Figure 5-61 Attach Tilt Legs to Multiline Terminal
3.
Push the Tilt Legs upward until they snap into place.
4.
Lift both ends of Tilt Legs until they come together (refer to
Figure 5-62 Connecting the Tilt Legs on page
Figure 5-62 Connecting the Tilt Legs
5.
Snap legs together and adjust to desired height. See
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Terminal.
5-68).
Figure