Installation - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
When using center feed, set the SW1 switch located on the back of
the adapter as follows:
Figure 6-21 In-Line Power Adapter Switch Settings
11.2.2

Installation

1. Set the SW1 switch on the ILPA-R adapter to the correct
setting for the ethernet switch to which it is to be connected.
2. Set the switch setting on the NEC IPhone or IP adapter to the
correct position.
Center Feed Hub System
IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 200/24 Switch
Center Feed Hub System
IEEE802.3af STD System
Cisco Discovery Protocol System
NEC BlueFire 200/24 Switch
IPhone (SW2) or IP Adapter (SW1)
NEC Power Patch Panel
(12 port NEC SN1604 PWRMS,
24 port NEC BlueFire 200/24)
8SHUBU Blade
Cisco Catalyst Power Patch Panel
Cisco Catalyst PRW Series
Issue 1.2
SW1 Setting
1
1
2
SW1 Setting
1
1
2
SW Setting
1
2
6 - 31