Wm-L Unit Attached To Wall Plate - NEC Univerge SV9100 Hardware Manual

Issue 1.2
5 - 96
5.2.10

WM-L UNIT Attached to Wall Plate

The WM-L UNIT (Wall Mount Unit) is used to attach any DT Series
multiline terminal to the wall plate This unit connects to the back side
of the telephone.
When optional adapters are used, the multiline terminal must be
installed on the wall plate using the WM-L UNIT.
1. Plug line cord in the wall plate receptacle. Leave about eight
inches of cord and bundle the rest.
2. Feed the line cord through the opening in the WM-L UNIT.
3. Plug the line cord into the Multiline Terminal as illustrated in
Figure 5-103 Plugging in Line
4. Align the four cutouts with the four tabs on the WM-L UNIT
(refer to
Line In
Figure 5-103 Plugging in Line Cord
Figure 5-104 Cutouts for WM-L UNIT on page
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Cord.
5-97).