Installation - NEC Univerge SV9100 Hardware Manual

Issue 1.2
4 - 50
 Eight Digital Station ports
 Two analog extension ports
 Two status LEDs
4.5.2

Installation

Install the GCD-LTA blade into any available universal slot.




When connecting a fax machine or analog
modem, make sure to set Program 15-03-03 to
1 (special terminal) to avoid communication
problems.
The SLIU and SLIDB are categorized as
TNV2. With this designation, off-premise
wiring is not acceptable. Any cabling to the
SLIDB PCB must be within the building – no
outside cabling is permitted.
Branch connection is not acceptable.
CTA adapter fitted to Model C telephone is not
supported on an LTA blade.
UNIVERGE SV9100
Installing the SV9100 Blades