Issue 1.2
5 - 120
Figure 5-138 Removing the Connector Cover
5.
Insert the lower claws of the Bottom Unit (see
Installing the BHA-L
terminal.
Figure 5-139 Installing the BHA-L UNIT
6.
Align connector on inside of BHA-L UNIT and push down until
unit snaps into place.
7.
Set tilt legs to desired position.
8.
Return the multiline terminal to the numbered keypad in the up
position.
9.
Connect the Line cord and the AC adapter.
Installing DT Series Digital and IP Multiline Terminals
UNIT) into precut holes on the multiline
UNIVERGE SV9100
Figure 5-139