Wall Mounting The Base On A Switch Box - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
4.12.1.4

Wall Mounting the Base on a Switch Box

1. Locate the screw holes on the base and hang the
cover over the screws on the switch box as
illustrated in
Switch
Figure 5-70 Wall Mounting Base on Switch Box
2. Hang the Multiline Terminal on the base.
.
Figure 5-70 Wall Mounting Base on
Box.
Figure 5-71 Wall Mounted Multiline Terminal
Because of strength variation in switch boxes, this
method is not recommended.
Issue 1.2
5 - 73