NEC Univerge SV9100 Hardware Manual page 112

Issue 1.2
3 - 40
1. Install the five rubber feet to the bottom of each chassis.
Figure 3-51 Install Rubber Feet for Multiple Chassis
2. Using supplied screws in the CHS2UG JOINT BRACKET KIT, attach
metal brackets to both ends of the 19" chassis and the CHS BASE
UNIT. Refer to figure below.
Figure 3-52 Install Metal Brackets with Screws
3. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-13
grounding the system.
4. Refer to 1.1.5 Install AC Power Cords on 19" Chassis on page 3-15
UNIVERGE SV9100
Metal
Brackets
1.1.3 Install
for complete details on
Installing the SV9100 Chassis
to