Installation; Led Indications - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
LED Indication
Live LED Busy LED
(Green) (Red)
On On
System Hardware Manual
ADP adapters)
 These ports provide -48V feeding.
 Two blade status LEDs – One Live LED, One Busy/Idle LED
Table 4-13 GCD-8DLCA/GCD-16DLCA Maximum Upgrade
Capacities
when they are upgraded.
Table 4-13 GCD-8DLCA/GCD-16DLCA Maximum Upgrade Capacities
19"
ESIU Chassis
with CPU
GCD-8DLCA
GCD-16DLCA
4.1.2

Installation

The GCD-8DLCA/GCD-16DLCA blades can be installed in any
universal slot in the system and up to a maximum of 20 DLCA blades
can be installed per system, providing up to 368 digital ports.
To install the GPZ-8DLCB
1. If installing the GCD-8DLCA and the GPZ-8DLCB daughter
board is to be attached, do so now. Refer to
on page
2. Each CNx01 connector (CN101, CN201, CN301, CN401) is
used to connect up to four digital extensions.
4.1.3

LED Indications

LEDs for the GCD-8DLCA
14 GCD-8DLCA/GCD-16DLCA LED
with its associated function and LED and Operational status. Refer
to Figure 4-9 GCD-8DLCA/GCD-16DLCA/ Blade
location of the LEDs on the blades.
Table 4-14 GCD-8DLCA/GCD-16DLCA LED Indications
Operation Status
System Initializing
provides the maximum capacities for the ESIU blades
19" Chassis
without CPU
5 6
5 5
GCD-16DLCA:
/
4-38.
GCD-16DLCA are described in
/
19" Chassis Networked
x4 Chassis
23
20
4.2.2 Installation
Indications. Each LED is listed
and for the
Remarks
–
Issue 1.2
32
32
Table 4-
4 - 33