Installing The Gba-L Unit - NEC Univerge SV9100 Hardware Manual

Issue 1.2
6 - 52
11.6.1

Installing the GBA-L UNIT

Before installing or removing the GBA-L
UNIT, remove the line cord, LAN cable, and
then AC adapter from the outlet.
1. Turn multiline terminal upside down.
2. Unplug the line cord and handset cord from the multiline
terminal.
Only one GBA-L UNIT can be attached to the DTL/ITL multiline
.
terminal.
3. Lower the tilt leg to the first position (refer to
Separate Tilt Leg from Leg Support on page
Figure 6-47 GBA-L UNIT
Installing SV9100 Optional Equipment
UNIVERGE SV9100
Figure 6-48
6-53).