Wall Mounting The Multiline Terminal; Wall Mounting A Multiline Terminal Using The Base Plate; Adjusting The Hanger Hook - NEC Univerge SV9100 Hardware Manual

Issue 1.2
4.12
5 - 70

Wall Mounting the Multiline Terminal

You can wall mount a DT Series connection Multiline Terminal using the base
cover or an optional wall mount unit. A wall mount unit must be used if
adapters are installed on the Multiline Terminal.
4.12.1

Wall Mounting a Multiline Terminal using the Base Plate

4.12.1.1

Adjusting the Hanger Hook

1.
2.
3.
Remove the hook from the unit.
Hanger Hook
Figure 5-64 Removing the Hanger Hook on a DT
Series Terminal
Turn the hook with the tab toward the top.
Slide the hook until it glides into position forming the
hanger hook for the handset.
Figure 5-65 Sliding the Hanger Hook into Position
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100