Charging The Battery - NEC Univerge SV9100 Hardware Manual

Issue 1.2
11.4
Remove the battery cover
from the back of the handset.
5 - 150
Figure 5-175 ML440 - Handset Charger

Charging the Battery

1. Install the handset battery as shown.
Insert the bottom of the battery into
the compartment. Lay the battery
down and push it gently until it snaps
into place.
Figure 5-176 ML440 - Handset Battery Installation
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Replace the battery cover
and slide it up into place.