NEC Univerge SV9100 Hardware Manual page 370

Issue 1.2
5 - 110
Figure 5-121 Remove Legs From Multiline Terminal
7. Remove the side panel.
8. Disconnect serial connection cord from terminal body. Leave
cord connected to the cradle unit.
9. Push the latch to the right to unlock the cradle unit. Then push
the cradle unit forward to separate it from the terminal body
(see Figure 5-122 Detach Cradle from Multiline
Figure 5-122 Detach Cradle from Multiline Terminal
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Terminal).