NEC Univerge SV9100 Hardware Manual page 348

Issue 1.2
5 - 88
a time.
3. Pry the side panel from the multiline terminal.
Side Panel
Figure 5-89 Remove Side Panel from Multiline Terminal
4. Turn the multiline terminal button side up.
5. Fit the projections of the supplied bracket into the
side of the multiline terminal.
6. Attach the bracket with three supplied screws.
Figure 5-90 Secure Bracket to Multiline Terminal with Screws
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Screws