Multiple Chs2Ug Chassis Installation - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
System Hardware Manual
6. Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2UG JOINT BRACKET KIT.
7. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-13
grounding the system.
8. Refer to
continue installation of the chassis or, Chapter 6 paragraph
Installation and Safety Precautions on page 4-3
blades.
3.1.2

Multiple CHS2UG Chassis Installation

Expansion chassis can be secured to the CHS BASE UNIT and require an
additional CHS2UG JOINT BRACKET KIT per chassis.
Figure 3-50 Install CHS2UG JOINT BRACKET KIT
1.1.5 Install AC Power Cords on 19" Chassis on page 3-15
Issue 1.2
1.1.3 Install
for complete details on
2.1
for installation of
3 - 39
to