Connectors - NEC Univerge SV9100 Hardware Manual

Issue 1.2
4 - 56
5.1.4

Connectors

Table 4-28 GCD-4COTA RJ-61 Cable Connector Pin-Outs on page
4-56 shows the pin-outs for the RJ-61 connector. Refer to
4-14 GCD-4COTA Blade on page 4-53
location of the connectors on the 4COIU blades.
Table 4-28 GCD-4COTA RJ-61 Cable Connector Pin-Outs
The CN2 connector is polarity sensitive (tip-to-tip, ring-to-ring).
RJ-61 Cable Connector – CN3, SLT Interface for Power Failure
RJ-61 Cable Connector – CN2, Trunks
Pin No.
Pin No.
UNIVERGE SV9100
Figure
for an illustration showing the
Connection
1 Circuit 4 – Tip
2 Circuit 3 – Tip
3 Circuit 2 – Tip
4 Circuit 1 – Ring
5 Circuit 1 – Tip
6 Circuit 2 – Ring
7 Circuit 3 – Ring
8 Circuit 4 – Ring
Connection
1 –
2 –
3 Circuit 2 – Tip
4 Circuit 1 – Ring
5 Circuit 1 – Tip
6 Circuit 2 – Ring
7 –
8 –
Installing the SV9100 Blades