Mount Dcl-60-1/Dcz-60-2 Console On Wall Plate Using Dss Wm-L Unit - NEC Univerge SV9100 Hardware Manual

Issue 1.2
5 - 100
DSS WM-L UNIT Using
Figure 5-109 Attach DSS WM-L UNIT Using Screws
5.2.12.2 Mount DCL-60-1/DCZ-60-2 CONSOLE on Wall Plate
using DSS WM-L UNIT
1. Locate the screw holes on the base and hang the cover over
the screws on the wall plate as illustrated in
Attach DSS WM-L UNIT to Wall
Figure 5-110 Attach DSS WM-L UNIT to Wall Plate
è
2. Plug one end of the line cord into the wall receptacle. Leave
Installing DT Series Digital and IP Multiline Terminals
Screws).
Because of variation in wall plates, this method is not
recommended.
UNIVERGE SV9100
Figure 5-110
Plate.