Applying Power To The Charging Unit - NEC Univerge SV9100 Hardware Manual

Issue 1.2
10.8
5 - 136

Applying Power to the Charging Unit

The unique design of the telephone allows the user to place the handset in the
charging unit with or without the belt clip attached. The charging unit can
charge a second battery with or without the handset being charged. The
battery packs can automatically be recharged either in or out of the handset.
Figure 5-154 Applying Power to the Charging Unit
Use only the supplied AC adapter for the charging unit.
The AC adapter furnished with this telephone may be equipped with a
polarized line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. If you are unable to insert the plug
fully into the outlet, try reversing the plug. Refer to
Plug.
If you cannot plug the AC adapter into the outlet, the outlet may need to be
replaced.
Route the power cord where it will not create a trip hazard,
or where it could become chafed and create a fire or other
electrical hazards.
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100
Figure 5-155 Polarized