UNIVERGE SV9100
System Hardware Manual
4.
Align the upper and lower bracket holes with the heads of
anchor bolts mounted on the wall and slide downward
(refer to
Figure 3-40 Install Screws (Option 2)
5.
Connect grounding wire to chassis. Refer to Chapter 4 paragraph
Installing the 9.5" Chassis on page 3-18
grounding the system.
6.
Refer to
2.1 Installation and Safety Precautions on page 4-3
installation of blades.
2.2.2.2
Wall Mounting the CHS2UG with the CHS2UG B Small Batt
Box
To install the CHSGW SMALL BATT BOX refer to section
Installing the CHSGW SMALL BATT BOX on the 9.5" Chassis
on page 3-70
Align the bracket halves (refer to
1.
Figure 3-40 Install Screws (Option
for complete details on
Issue 1.2
2)).
1.3
for
6.3
Figure 3-37 Wall
3 - 31