Issue 1.2
5 - 122
8.1.2.4
Connecting the Paired Device
Enable the Bluetooth device. Select [2. Enable] in the
connection screen.
Figure 5-142 Connecting the Paired Device
8.1.2.5
Unpairing
To unpair a paired the Bluetooth device, select the device
in the [Delete] screen.
Figure 5-143 Unpairing a Device
8.1.2.6
Visibility Setting
Set whether to make information about the BHA-L UNIT
visible to other Bluetooth devices (default: [1. Disable]).
Figure 5-144 Setting Visibility Option
Installing DT Series Digital and IP Multiline Terminals
After pairing a Bluetooth device, be sure to
configure its connection to enable it. If
settings are not completed, the Bluetooth
device that does the pairing cannot be used.
UNIVERGE SV9100