6.11 (Rj) Re-Installing The Processor Air Duct; Figure 59: Re-Installing The Battery Backup - Kontron CG2300 Installation And Maintenance Manual

To re-install the battery backup module:
1. Position the SuperCap backup battery assembly over the support cross bar. (Figure 59, "A")
2. Tighten the captive screw that fastens the battery backup to the support cross bar. ("B")

6.11 (RJ) Re-Installing the Processor Air Duct

The air duct is required to ensure proper air flow within the chassis, so be sure that it is in place again before re-installing the
chassis cover.
1. Place the processor air duct over the processor sockets and DIMMs. Align the front tabs with the captive screws on the
support cross bar. (Figure 60)
(The air duct is secured when the right riser card assembly is mounted on the support cross bar above it.)
86

Figure 59: Re-Installing the Battery Backup

Installation and Maintenance Guide
www.kontron.com